Viathan 8GB DDR3 1600MHz 1.5V Desktop Memory RAM

Prepare for Installation

Step 1

Make sure you have the correct type and speed of RAM compatible with your motherboard. Check your motherboard's specifications or manual for this information.

Shut down your computer and unplug it from the power source.

Ground yourself by touching a grounded metal surface or wearing an anti-static wrist strap. This helps prevent damage from static electricity.

Open the Computer Case

Step 2

Remove the screws or fasteners securing the side panel of your computer case.

Slide off the side panel to expose the internal components.

Locate the RAM slots

Step 3

Identify the RAM slots on your motherboard. They are typically located near the CPU socket.

Check how many slots are available and note which slots are currently occupied.

Remove existing RAM

Step 4

If there are already RAM modules installed in the slots you want to use, gently press down on the retaining clips on both ends of the slot.

This will release the module, allowing you to carefully pull it straight out of the slot.

Install the new RAM

Step 5

Handle the RAM module by its edges, avoiding touching the gold connectors or any exposed circuitry.

Align the notch on the bottom of the RAM module with the notch in the RAM slot.

Insert the RAM module into the slot at a slight angle, making sure it is firmly seated.

Apply even pressure to both ends of the module until it clicks into place.

If you are installing multiple modules, repeat this process for each one.

Secure the RAM

Step 6

Once the RAM modules are correctly installed, gently push them down until the retaining clips on both ends click into place.

This ensures that the modules are securely held in the slots.

Close the computer case

Step 7

Slide the side panel back onto the case.

Secure it with the screws or fasteners you removed earlier.

Power on the computer

Step 8

Plug in the power cable and any other peripherals you disconnected.

Turn on your computer and wait for it to boot up.

Verify installation

Step 9

Check the your system's properties or use a diagnostic tool to confirm that the new RAM is detected and functioning correctly.

If you are using Windows, right click the "Start" button and click system. Under "Installed RAM", the RAM running in the computer will be listed.

Step 1

What type of computer do I have?

A Laptop computer will require SO-DIMM RAM, which is short in length and has approximately 200 pins.

A Desktop computer will require UDIMM RAM, which is longer than a laptop RAM module (more than twice the size) and has approximately 240 pins.

Step 2

What is the maximum amount of RAM my computer can take?

Method 1:

1. Press Windows Key + R, type “cmd” in the search bar, and press Enter.

2. On the command prompt screen, type wmic memphysical get maxcapacity, and press Enter.

3. Some numbers will appear on the screen. These numbers represent the maximum supported RAM capacity in Kilobytes. Divide the numbers by 1024 two times:

Hence, the maximum supported memory capacity is around 32 GB.

Method 2:

Check the official documentation for your machine on the manufacturer's website.

Step 3

How many RAM slots does my computer have?

Method 1:

1. Press Windows Key + R, type “cmd” in the search bar, and press Enter.

2. On the command prompt screen, type wmic Memphysical get MemoryDevices, and press Enter.

3. A single digit number will appear on the screen underneath MemoryDevices. This number represents how many RAM slots your computer has. In our case, it says "4".

4. This means the maximum number of RAM modules that can be installed into the computer is 4.

5. It also means, that a maximum of 8GB per slot can be installed. This is because the total Maximum RAM number (32GB in our case) is always divided by the number of slots to determine the max capacity per slot.

Examples:

Method 2:

Check the official documentation for your machine on the manufacturer's website.

Step 4

What generation of RAM do I need?

Method 1:

Task Manager will tell you what generation type your machine can support.

Hold Ctrl + Shift + Esc at the same time, or right-click the Start button and click Task Manager, to bring up the Task Manager Menu.

There are five generations of UDIMM and SODIMM RAM (DDR, DDR2, DDR3, DDR4 and DDR5) and they are not interchangeable. So if your machine says DDR4, that means it can take DDR4 and nothing else.

Method 2:

Check the official documentation for your machine on the manufacturer's website.

Step 5

What is the maximum amount of RAM my computer can take?

Task Manager will also tell you what the speed of the RAM running in your machine is.

Method 1:

Task Manager will tell you what generation type your machine can support.

Hold Ctrl + Shift + Esc at the same time, or right-click the Start button and click Task Manager, to bring up the Task Manager Menu.

Memory RAM speed is interchangeable. However, if your machine is rated at 1600MHz for example, and you install 2400MHz, the RAM will only run at 1600MHz.

Note: This method will only tell the max speed of the RAM currently running in your machine. Please see the manufacturer of your laptop or desktop for the exact maximum clock speed.

Step 6

Is my computer 32-bit or 64-bit?

Method 1:

1. Press the Windows key + R to open the Run dialog box. Type "msinfo32" and press Enter.

2. The System Information window will open, displaying various details about your computer.

3. Look for the "System Type" field, which will indicate whether you have a 32-bit or 64-bit operating system. A 32-bit OS can only run a maximum of 3.5GB, regardless of the hardware.

Method 2:

Check the official documentation for your machine on the manufacturer's website.